Are you continuously struggling with Netgear router orange light issue? Tried hard to fix the issue but nothing worked? If your answer to the mentioned questions is yes, then luckily you are reading the right post. Here, you will learn all the possible troubleshooting tips to fix Netgear router orange light issue in minutes. Keep reading!
Fixed: Netgear Router Orange Light Issue
Wrong Location
First things first, the location of your Netgear router matters a lot. If you have placed your Netgear router:
- Inside a cabinet
- Beneath a table
- Behind a device
- In a corner
- Or near to walls, windows, thick walls, or doors, then you will surely struggle with Netgear router orange light issue.
Thus, to cope up with the issue, do the following:
- Select an open and higher location for your Netgear router.
- Place your modem and the Netgear router in reach of each other. If possible, place your devices in the same room.
- Connect your Netgear router and the modem using an Ethernet cable (if placed in the same room or you can also connect them in a wireless manner.
After applying this router troubleshooting tip, open a desktop or a laptop and Ping 192.168.1.1.
Low Power
If your Netgear router isn’t getting sufficient power supply, then also you may struggle with the issue. Thus, to fix it, do the following:
- Another thing that you have to make sure is that your Netgear router is properly plugged in.
- Then, ensure that your Netgear router is receiving continuous power supply from a working and non-damaged wall outlet.
Outdated Firmware
In the event that you continue to avoid the firmware update notifications for a longer time, you will surely stuck with Netgear router orange light issue. Therefore, log in to your Netgear router using 192.168.1.254 or 10.0.0.1 IP, enter your router’s model number, click on Firmware Update section and check whether there is any new version of firmware is available for your router.
Connectivity Issues With Modem
If your modem is not connecting to your Netgear router, then you may get stuck with the issue. Thus, to fix it:
- Turn off your Netgear router and your modem.
- Wait for a short while.
- Plug in your modem first.
- Wait for a couple of minutes.
- Plug in your Netgear router.
After applying this troubleshooting step, try to connect your Netgear router to the modem in a wireless or wired manner.
Improper Netgear Router Setup
Bear in mind that improper or partial Netgear router setup may also cause orange light issue. In such a case, you have to set up your Netgear router properly by following the exact instructions given in its manual. You can also get Netgear router setup instructions by logging into your device using 192.168.1.254 or 10.0.0.1 IP.
Still Facing the Same Issue?
On the off chance if you are still struggling with the same Netgear router orange light issue, then consider resetting your device. But before you reset your Netgear router, make sure to take the backup of your router’s settings, username and password.
To reset your Netgear router, do the following:
- Right off the bat, disconnect your Netgear router from the modem.
- Do not unplug your Netgear router.
- Then, locate the Netgear router reset hole.
- Once found, push it gently with a paper clip or any thin object.
- Hold the Netgear router reset hole for a short while and release it.
- That’s all! Your Netgear router resets successfully.
Now, log in to your Netgear router using 192.168.1.254 or 10.0.0.1 IP and configure it again.
Wrapping Up
These were some possible fixes to troubleshoot Netgear router orange light issue. If you are still struggling with the same issue, contact our technical experts now via comments.
Read Also – WHICH TWITCH BOT IS THE BEST
