The gas water heating system is known for its instant heating efficiency. Instead of waiting for 10 to 15 minutes with an electric water heating system, you will start getting water right after turning it on. Its installation is also easy as compared to other water heating systems. Talking from the economic perspective, they are more affordable because of the cheaper gas rates. If you are living with a big family, a gas water heater is the best option because of its faster recovery rate. Despite so many advantages, you should not forget the technical faults that may disturb the entire daily routine. Below is a list of malfunctioning issues that you may have to face with average water heating systems.
1) Leakage
The leakage issue mostly appears when your water heating system is old and its tank metal has started corroding. In some cases, leakage also occurs when hoses are not connected properly. Any loose connection will result in continuous dripping that not only affects the heating efficiency but also empty your main water tank faster.
2) Rusty water
If you are noticing some change in the colour of water, it must be due to the rust. This problem mainly occurs when you turn on the water heating system after a long time. It is advisable to keep the tap of the gas water heater running for a few minutes continuously. After filling 4-5 buckets, the rust will wash out automatically.
3) No or less water flow
If the water is not running in adequate quantity, there must be an issue of sediments buildup inside the water heater system. Find a local plumber near you who has experience in dismantling and assembling off gas water heating systems.
4) Too hot water
Just like other typical water heating systems, the gas water heater also works with the help of a thermostat. If it is not set at a safe temperature, water becomes too hot within a few seconds. If you don’t add just the temperature at around 120 degrees, it may cause severe damage to the entire heating system.
5) Inadequate flame
Is your main burner not staying lit consistently? If yes, there must be an issue of faulty gas valve. Ask a local plumber near you to repair or replace the valve as soon as possible. Sometimes, proper cleaning can serve the purpose.
6) Slow recovery
If your water heating system takes too much time to recover after a single-use, check the vents. Clogging in the vent system of your gas water heater is the main reason for slow recovery time. If the vent system is not exhaling heat properly, the temperature of the entire heating system increases.
Search online for plumbing service agencies holding specialisation in gas water heating system repairs like water heater repair Las Vegas. Don’t trust any random service provider in your area. Always ask for service and parts warranty. Get a referral if possible.
